Replacement Handles For UPVC Windows

uPVC door handles can loosen or break off. Fortunately replacing them is a simple job with the proper tools.

Check for the screws or pins holding the handle in place to identify the kind of handle. Once you've identified them, remove them and carefully pull the handle off its spindle.

Espag Handle

Espag handles are the most commonly used type of handle that is found on double-glazing uPVC windows. They are flat and cylindrical in shape. They're usually made of uPVC but they can also be made of other materials depending on the design and style of your window. Handles are available in a variety of shapes and colors to match your decor.

The espag may also be called a cockspur or spade. It's typically found on older upvc door locks and Handles windows and is a good choice as a replacement for a broken handle. They're not as secure as modern handles however they do provide a simple locking mechanism. The handle has two round studs called mushrooms, that can move up and down when the handle is turned. These catch into a metal plate on the frame, referred to as the keep. The handle is also available in a cranked version which allows more space for your hand and a more sleek appearance, or an inline design that some prefer.

These types of uPVC window handles are often found on older timber windows as well as double-glazed ones. They are typically made of aluminum or uPVC however they may be made of other materials too. Espag window handles are locked using a key or with wedge blocks that are placed between the frame and handle. They are also simple to maintain and you can buy replacement parts should they fail to function.

You should check the size of spindle at the back of the handle before selecting the correct espag handle. It should be a maximum of 7mm in diameter. Also, you must measure the height of the step at which the handle will fit on the frame of the window. The proper size handle will ensure that the window is closed with a tight seal.

Monkey tail handles are a wonderful option for windows with a history. They also work well with modern windows and come in left-hand and right-hand versions. They feature a chic reeded detail at the end and a slim backplate that can be inserted into the frame of the window. These handles are also lockable and have a good step height.

Venetian Handle

When it comes to replacing window handles made of upvc there are many different types of handles to pick from. There are Espag handles, Cockspur handles, spade or blade handles and tilt and turn handles. The kind of handle you select will depend on the type of window you have as well as on your personal preferences. It is also important to take into consideration the size of the handle and the spindle length. It is important to make sure that the new handle fits into the screw holes and have the proper spindle length.

A cockspur handle is among of the most sought-after types of replacement handles for windows made of upvc. They are available in a broad variety of finishes and colors. They are also available in locking and non-locking models. The main difference is that the cockspur handle has the option of locking it with a key. The keyed handle can be used in high-security properties, and is more secure than a handle that is standard.

Venetian sliding door handles are typically fixed by two bolts, similar to Espagnolette handles. They are low-projection from the frame and don't cause blinds to be damaged like other window handles. They're also a great choice for flats with a high rise because they are easy to clean from the inside. Window handles are a great choice if you are looking for a stylish and functional replacement upvc window handles for your upvc replacement door handles Windows.

Regardless of the type of window you have, there's a handle that is suitable for it. When choosing a replacement handle, it is important to consider the size and shape the screw holes are, the step height and the length of the spindle and the handing. The handle must also be able support the weight of your window when it is closed.

A tilt and turn handle is perfect for windows made of upvc that open from the side. It serves two purposes and lets you tilt and turn the windows, which is ideal for ventilation, cleaning and security. It is also easy to use, even using just one hand. The handle can lock the window in a wide-open position, or it can be tilted so you can enjoy the fresh air without worrying about whether burglars will break in.

Pear Drop Handle

If you've damaged your uPVC window lock or handle, it's likely that you will want to replace it. You can do this yourself. First, close your window and then take out the screw on the base of the handle. This will reveal two more screws. Once these screws are removed, the handle should be released. The multipoint lock can be removed by removing the two screws. When the new handle is ready, simply screw it back into place. If the handle has a caps for screws you must also replace it.

Espagnolette handles are the most common kind of handle that is used on uPVC windows. They can be identified by their flat strip design and work with multipoint locks that are placed around the frame to provide top-of-the-line home security. They can be fitted to open left or right, and come in a variety of finishes.

Cockspur handles are a more traditional design of handle. They are popular for heritage improvements, as well as for those who like an appearance that is more traditional. These handles come with a shaft that runs through the handle and into the gearbox. This turns a series of shootbolt rods to secure the window.

Pear drop handles provide more security and are more modern than cockspur styles. These handles are an excellent choice for those who want to update their windows but still retain the traditional feel of their home.

The Cornish Heritage Tear Drop Espag handle is inspired by 19th Century Ironmongery. It is ideal for casement windows that are of a historic design and will give your home an elegant exterior. This handle is compatible with the tear drop operating stay and dummy stays to make a completely matching heritage window.

Choosing the correct handle to replace your uPVC windows can be difficult but our easy guide and helpful tips will ensure that you receive the best results. Bridgewater Glass can help you upgrade your complete window set or replace your current uPVC handle and lock.

Handle that is tilted and turns

Double-glazed windows can be tilted upwards or down to allow for ventilation. Tilt-and-turn handles are employed. The handle is rotated and a lock mechanism activates when the window is tilted into either position. These windows are popular in Europe and offer better ventilation and enhanced safety, particularly when children are present. When replacing a uPVC tilt and turn handle, the new handle should be compatible with the window model and locking mechanism to ensure security and functionality.

Tilt-and-turn windows are usually constructed of uPVC, aluminum or timber frames. Timber frames are utilized by homeowners who prefer an older-fashioned style to their home. UPVC frames provide the most value for money and are durable as well as energy efficient and require little maintenance. Aluminum frames, on the other hand are a more expensive option, but they offer the strongest strength and resistance to corrosion.

The uPVC handle turns and tilts in a similar manner as an espagnolette. However, it is heavier and larger because it is fitted to larger windows. They are also more robust because they are able to withstand much greater forces as the window is opened inwards and tilted.

The key to a replacement tilt-and-turn handle is that it can be locked in one of four positions. This will stop the window from opening all the way to the room. It is possible to accomplish this using the lock key. This is especially useful when there are small children around, as it keeps them from opening the windows too far.

The majority of tilt-and-turn window handles have this feature included as standard. Cheap Chinese products are not the only exception. Sealco Scotland stock a wide range of high quality tilt and turn handles from top manufacturers like Hoppe, Trojan, and Sensei.

It is crucial to measure your existing handle before purchasing a tilt-and-turn window handle. This will assist you to find the right design. You'll need to measure the distance between the screw fixing holes, that are typically 43mm centre to the centre. You may have to remove the cap covers or backplates with sprung load from some handles to expose the screw positions.