Cat flaps let your cat leave and come back whenever they want without having to let them in or out. They also can help stop your cat from peeing in the house.

Fitting a cat flap in upvc door cost flap in the door panel made of upvc is much easier than in glass doors, however it will require some expertise and the appropriate tools.

Take a measurement of the door

Fitting a cat flap in the door can be a challenge but as long as you select the right kind of cat flap, take your time and follow the steps provided it should not prove to be too much trouble. We will show how to trace the shape, use the jigsaw to slice the area in the door and then finish off the job by attaching the flap to the door. This will ensure that the flap remains in place and shields the door from rain and wind damaging the door.

To determine the size of the cat flap you require, take a measurement of your pet's width. This will let you select a cat flap that is large enough for your pet to enter the house and exit without needing to open the door every time.

Once you have the measurements, you can mark out the area on the door where the template should be placed, typically this is done using an X, but some kits come with a drawing that shows the location to drill, if yours does, then you can stick it to the door and draw a line around it. If your door has a sill or moulding at the bottom, make sure that you leave enough space between your cat and the moulding or sill.

Use a set square to check that you are cutting correctly and ensure that the hole is in a rectangle shape. Once you are happy with the result, you can begin removing the rest of the door material. If you own a set square then use it to check that you're cutting properly and to ensure that the hole is in a rectangle shape, once you are satisfied with this you can begin to remove the rest of the door material.

Draw a Line

The cat flap allows you to let your pet inside and out without worrying about unwanted visitors or unwelcome gifts. It also prevents drafts and helps keep the temperature inside your home in a stable manner. Fitting a cat flap to your door might seem difficult to those who haven't done it before. Many people call an expert carpenter or joiner to complete the job. This is a viable option, however you can do it yourself if the tools are right and the instructions are followed.

Although this is much simpler to accomplish when using a timber door it is still possible to do this in uPVC doors, though you must be cautious not to damage the doors since this could end your warranty. First, you need to examine the door's measurements to make sure it will accommodate the new cat flap installers near me-flap. This should be simple enough when you have an ordinary uPVC door, however you might need to take more care if you have an alternative type of door as these are more difficult to cut than solid uPVC panels.

The next step is to determine the belly height of your cat. This is the height between the floor and the bottom of your cat's stomach. You will need to find an area on the door that will allow your pet to move through wall cat flap easily. Once you have the information you'll have to mark the area with a spirit level and a pencil, so that you know the hole will be suitable for your cat.

After you've marked the area, you're now ready to cut the hole. You will need to use an jigsaw. It is crucial to take your time to ensure that the cuts are clean and smooth rather than uneven and rough, as this could damage your door. Be sure to wear safety glasses and a dust-proof mask at all times when using the jigsaw, since breathing in the dust can be dangerous to your health. After you've completed the cutting, you'll have to smooth the edges of the hole with sandpaper, so that the cat flap will fit easily.

Make a hole

The process of Fitting Cat Flap In Upvc Door Panel a cat flap into an existing door panel or double glazing sealed unit is quite difficult. It is tempting to tackle the task yourself, but unless have a lot of experience in DIY it is likely to be best to have a professional in to do the job for you. A mistake could not only be ugly, but also pose a security threat. It could allow cold air to enter when the cat is outside and hot air out when it is inside.

Mark the hole position on the door using a pencil and spirit level. This will ensure it is properly positioned and runs flush with the rest of the door. Make sure you have some sandpaper on the ready to smooth any edges.

Wear any safety gear you require when working with a power tool. If you are concerned about the sound of the jigsaw, you can purchase an electric version that is much quieter and easier to use.

It is best to only remove the material that is required to fit the flap. A little bit of extra material will be needed to cover the thickness of the the flap, but removing more than this could cause issues and cause damage to the door frame.

If the upvc door has a metal panel or frame, it could interfere with the microchip flap. In this scenario, you will need to create an over-sized hole to ensure that the metal does not come into contact with wall of the flap.

If you're planning to install a cat flap in windows made of double-glazed or upvc with metal frames it is necessary to speak with an expert. They will offer you a brand new piece of glass with the hole that is already designed for the cat flap. It is much less expensive to have this done than trying to fix the cat flap onto an existing pane of glass that was not designed specifically for this purpose.

Fit the Flap

Cat flaps give your pet the freedom to go and come anytime they want, allowing them to relax in the home whenever they like. If you have a upvc door panel with cat flap fitted front door, it may be difficult to install the cat flap. This is especially the case in the event that you don't own glass panels that is cut. If you're willing to purchase and install a new half-glazed uPVC panel, then it's possible to install the cat flap to these doors. It's not a simple matter of cutting a hole into the door. It is also necessary to perform a few steps to ensure that the door is secure.

A uPVC, GRP or composite door panel typically comprises an extremely thin plastic outer skin joined to a soft insulating polystyrene core. The material is fairly fragile and care must be taken when cutting through it to avoid damaging. This type of door usually includes a template which you can use as a reference to cut the hole in the door.

After you've marked the position of the hole in your door, it's time to install the flap itself. You can pick from a range of designs, from simple push-button units to microchip-activated ones that allow your pet in. Whatever type of cat flaps you select, it's vital that your cat can use the flap comfortably without getting caught in bad weather.

It's a good idea to opt for circular fittings instead of one that is square, since circles are more securely cut into door glass. This is because square holes can make the glass more susceptible to cracking if drilling is applied to it. This is also a safer option because you won't need to drill into the toughened glass which could shatter and harm your pet or family. This is especially crucial if you have a child or elderly person in your home who may be injured by shards glass.