Cat flaps let your cat go inside and out at their own pace, without needing to let them in or out. They also can help stop your cat from peeing in the home.

fitting Cat flap in upvc Door Panel a cat flap in a door panel made of Upvc is much simpler than installing one in a glass door, however it will require some expertise and the right tools.

Measure the Door

The installation of a cat flap inside a door can be tricky however, as long as you use the correct type of cat flap be patient and follow the steps provided it shouldn't be too difficult. We will show you how to mark the shape and use an jigsaw to cut out the door's opening. Then we will finish the job by attaching the cat flap. This will ensure the flap stays in position and protects the doors from the damage caused by rain and wind.

To determine the size of the cat flap in bifold doors flap that you require, measure the width of your pet. This will ensure that the flap is large enough to let your pet go inside and out of the house without needing to open and close the door every time, yet small enough to prevent them from moving too far in either direction.

If your kit has a drawing showing where to drill then you can place it on the door, and then use a pencil around it. If your door has a sill or fitting Cat Flap in upvc door panel moulding at the bottom, make sure you leave plenty of space between your cat and the moulding or sill.

Put on your eye protection as well as fitting a cat flap dust mask. Then using a jigsaw start to cut along the line you have pencilled in, don't try to push the blade too hard because this could cause it to cut more quickly than you would like it to. Set the square with a ruler to ensure that you're cutting the material correctly and that the hole is a rectangle. Once you are satisfied with the final result, you can take out the rest of the door material.

Draw a Line

The cat flap lets you to let your pet in and out without having to worry about unwanted visitors or unwelcome gifts. It also stops draughts and helps keep the temperature in your home steady. The installation of a cat flap your door might seem difficult to those who haven't done it before. Many people will call an expert joiner or carpenter to do the job. While this is certainly an option, it is possible to do the job yourself if you have the appropriate tools and follow the instructions carefully.

It is much easier to do on a wooden door, but it is still possible using uPVC. However, you must be careful not to damage the doors since this could invalidate your guarantee. First, you need to measure the door to make sure it will accommodate the new cat-flap. If you have an ordinary upvc door panels cat flap panel, this should be easy. However when your door is composite or a different type of door, you might require more care.

The next step is to determine the belly height of your cat. This is the distance between the floor and the bottom of your cat's stomach. It is important to locate a space on the door that allows your cat to move through easily. Once you have this information then you need to mark out the area with an eraser and a spirit level so that you can be sure that the hole you make will be suitable for your cat.

After you have marked the area, it's now time to cut the hole. You will require the jigsaw, and it is essential to take your time in order to ensure that the cuts are smooth and straight, rather than uneven and rough, since it could cause damage to your door. Wear safety glasses and a dust mask when working with the jigsaw. Inhaling sawdust is dangerous for your health. After you've finished the cutting, you'll have to smooth the edges of the hole with sandpaper so that your cat flap will fit easily.

Make a hole

It isn't easy to fit a cat flap into the door panel or double glazing unit. If you are not very skilled in DIY, it is best to hire a professional to do the work for you. A faulty job can not only be ugly and unattractive, but could also be security risks. It could let cold air to enter when the cat is outdoors and hot air out when the cat is inside.

The first thing to do is mark out the location of the hole in the door with a pencil and a spirit level, this will ensure that it is correctly positioned and that it runs in a straight line with other parts of the door. Make sure you have sandpaper on hand to smooth any rough edges.

Wear any safety equipment you need to work with an electric tool. If you are concerned about the sound produced by a jigsaw you can buy one that is cordless, which is quieter and more user-friendly to use.

It is crucial to only remove the material required to make the cat flap. It is important to leave some extra material for the wall thickness of the cat flap. However cutting off too much material can cause problems or even damage the door frame.

If the door is made of upvc and is made of metal, or has a frame, it may interfere with the microchip flap. In this scenario you'll need to create an extra-large hole to ensure that the metal doesn't come into contact with wall of the flap.

If you're looking to install a cat flap inside a double-glazed or upvc door panel cat flap window with metal frames, you'll need to consult an expert. They will provide you with a brand new piece of glass with the hole already pre-made for the cat flap. This is less expensive than trying to install a cat flap in an existing pane that was not made for this purpose.

Place the Flap

Cat flaps allow your pet the freedom to move around whenever they want, allowing them to relax at home whenever they'd like. However, if you own an uPVC door, it might be difficult to fit a cat flap, especially when you don't have glass panes that can be cut to fit one. If you're willing to buy and install a new half-glazed replacement upvc door panel with cat flap panel, then it's possible to add the cat flap to the doors. It's not as simple as just cutting a hole in the door, however there are some things you'll need first to ensure that it's safe.

A composite, uPVC or GRP door panel is typically composed of a thin plastic skin that is bonded to an insulating polystyrene base. The material is extremely fragile and care should be taken when cutting into it to avoid causing damage. This type of door typically comes with a template drawing which you can use as a guide to cut the hole into the door.

After you have marked out the hole in your front door, it is time to put in the cat flap. You can purchase and install many different models that range from simple button operated ones to ones that are activated by microchips that allow access only to your pet. However, regardless of what kind of cat flap you choose it is essential to ensure that your cat can use the flap without getting trapped outside in bad weather.

It's a good idea to select circular fittings instead of a square one, as circles can be more securely cut into the door glass. This is because square holes are more likely to crack the glass when drilled. It's also a safer option to use as you don't risk drilling into toughened glass that could shatter and injure your pet or family members. This is particularly important if there are elderly or children in your home who might be injured by glass shards.