It might seem daunting to put up a cat flap but with the right instructions, it's not too difficult. Find out how high you'd like your cat flap to be (normally, it is at the belly height). Mark this point on your door and then use the template provided to guide you when drilling.

If you have a small kitten hold the door open very slightly and gradually push it to enter. Reward it as it passes through.

Take a measurement of the door

A cat flap lets your pet to go in and out of your home at the time that is convenient for you. This will keep your cat healthy as it ensures that it is exercising regularly and also be able to go back inside if it is stranded outside during bad weather. It also can reduce the amount of time you'll have to spend letting it in or out and can also ensure your home is secure by allowing you to be aware of when it went out.

However, it is important that the flap on your cat is properly fitted to stop your pet from being able to escape through it or glass cat flap installation near me be pushed through by any other animals (e.g. dogs). You should determine the height of your pet's belly and the size of the doorway in your home to ensure the flap is at the right height. If your cat is a little taller or shorter than average, you can alter the position of the flap by moving it up or down a small amount.

The next step is to make use of a spirit level to mark the center of the door, where you will be installing the flap. Then, using the marks as an outline, cut the shape of your flap using a jigsaw. Once you've cut the space, sand down the edges of the door to create smooth surfaces. You can then drill any fixing holes that are required.

Installing a cat flap ought to not take more than two hours. The process is a bit more difficult if you have to install it in the case of a uPVC door or a composite one. This is because these doors come in various thicknesses, which could affect the way the holes are cut. We always suggest to consult with an expert for your first experience working with glass.

Measure Your cat flap fitters near me

A cat flap will save you from listening to your pet meow for you to let it in or out. This is especially useful for cats that are inside during the winter months while you are at work.

It is important to first measure your cat before you begin the installation. Although it might appear to be a simple operation it is crucial to get the measurement right or your cat will find it difficult to use.

First, ensure that your cat is relaxed and glass cat flap installation near me not stressed prior to taking the measurements. You will need to hold them in a position where they are not able to move, and make sure that the measuring tape or ruler is flat against their body, not bending in any way. You can get an accurate measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you've got your cat's measurements, it's time to look at the door to decide where to put the flap. The flap should be placed at the level of your cat's belly. This will allow them to go through the door with minimal effort. This will also prevent the flap from making too much noise as it swings back and forward.

You should also think about the thickness and the structure of the uPVC door or composite. While all doors made of timber have a similar thickness, uPVC or composite doors may differ in their overall structure. This can make the installation of the flap for your cat more difficult since you need to ensure the hole is the proper size.

It is also worth reading through the directions that come with the kit to locate an illustration template that can be used to determine the location of the hole inside the door. This will help you determine where the opening needs to be, and also to ensure that the template is placed correctly on the door. Using a spirit-level to ensure that the template is sitting right against the door can be extremely helpful.

Cut the Flap

Before you can put in your cat flap you have to cut the door's panel to make it large enough to accommodate it. It can be a difficult job so it's recommended you hire a professional to assist you if you do not have the skills or experience. You can also read the instructions included with the kit to learn how to do it properly.

You can consider the height of your cat's or kitten's stomach to guide you. As a general rule put the flap approximately 10-15 centimeters above the ground. This is the typical height of the stomach for cats. This way your cat can move through the flap comfortably and it will also give any other cats or curious neighbours difficult time trying to enter or leave.

Draw the location of the cat flap on the door using the pencil. Then, if your kit includes an outline of paper, place it on top of the door and use the markings to drill holes into each corner of the template. Then, you should be able cut out the template shape and replace it with the cat flap in bifold doors flap.

You can install the cat flap yourself in the door made of wood or uPVC when you're confident with the use of a jigsaw. Be sure not to cut into the mullions or rails that run vertically of your door. You can use a jigsaw cut the panel into a square or a circle, depending on the design of your cat flap. Remember to take your time and don't try to force the jigsaw to cut faster.

After the hole has been cut, carefully place the cat flap in its new home. Make sure it is firmly secured. If the flap is fitted with screw caps, push them onto the protruding bolts. Once the screws have been installed then sand the rough edges and seal any gaps. This will block drafts from entering your home.

Install the Flap

If you have a standard cat flap, you can encourage your pet through it by placing a small amount cat food on the outside of the door. You can also try pushing the cat using a stick or your hand. Once your pet is used to moving through the flap, it will be able to move in and out as it wishes, so you can let it out or in without having to be there keeping the door open for it throughout the day (and likely in all weathers).

You can install the flap onto an UPVC or glass cat flap installation near me (from Cityu) door although this may not be quite as straightforward as fitting one into a wood external door because the UPVC and glass doors aren't a uniform thickness. This could have an enormous impact on the way you cut the flap's hole, and whether the flap fits correctly after installation.

The mounting kit might include a template showing you where to drill holes. If the kit doesn't include a template you can make one by yourself. It's important not to use the jigsaw to in order to cut, so it doesn't create a larger than needed hole in your door.

The majority of cat flap fitters near me flaps are rectangular or square in shape, however there are also some which are circular, and are generally more difficult to place. If you have a circular flap, ensure that the hole is in the correct spot on your door. If not, your cat may not be able use it, and may be locked outside for the entire day (or at night).

Some cat flaps come with locks that permit you to manage the time your cat flap insulation comes and goes. They are helpful when your cat is scared of going out in the dark or coming back to the house at night. They can also be helpful for those who work all day. Certain locks can be used to lock entry or exit, and others can be locked in both directions. This is helpful for older cats or sick cats who do not want to go outside in bad weather.